Author Topic: Carpet Stain Removal: What Not to Do  (Read 2470 times)


  • Administrator
  • Newbie
  • *****
  • Posts: 26
    • View Profile
Carpet Stain Removal: What Not to Do
« on: December 01, 2015, 08:41:33 PM »
First and foremost, don't wait!
Scoop up solids from your carpet as soon as possible and use a clean white cloth to absorb liquids.

Don't scrub.
Gently blot carpet with a stain remover to avoid pushing the stain deeper into the fibers. Apply the right stain remover to the stained area, and then use a white cloth to absorb moisture.

Continue using clean cloths until the stain no longer shows on the blotting cloth. Don't over-wet or it will take longer to dry and possibly cause more damage. Apply water in liquid cleaners in moderate amounts and if possible test cleaner agent on a unnoticeable corner or section of the carpet prior to applying to ensure no damage to carpet or rug.

Excess moisture will damage carpet backing. Don't forget to rinse. After using any type of solvent, remover, or detergent, rinse the cleaned area with water to remove residue. Sticky residues will attract dirt, which will re-stain your carpet.

Don't air dry.
Letting the carpet air dry may result in noticeable rings. So, cover the area with absorbent white cloths, then place a non-staining heavy object on top of the cloths and let it dry overnight. Remove the towels, and then vacuum or hand brush the clean area to plump up the carpet's pile. And those are the do's and don'ts of carpet stains.